Medical Equipment in Brasilia

MedPrax

Babcock clamps are surgical grasping instruments used for handling tubular tissue, including bowel. Their rounded, fenestrated working-end pattern supports tissue positioning during open surgery. They are selected where the grasping profile needs to suit the structure being held and the operative exposure.

MedPrax

Deluxe 5-function electric ICU hospital bed with motorized backrest, knee rest, height elevation, Trendelenburg / Reverse Trendelenburg, ABS split side-rails with built-in controls, and manual/electric CPR quick release.

MedPrax

A Veress needle is an access instrument used for introducing insufflation gas during laparoscopic preparation. It forms part of the equipment used to establish pneumoperitoneum before placement of working ports. The needle length and connection format are selected to suit the clinical access technique and insufflation setup.

MedPrax

Neurosurgical drills are used for controlled bone drilling during cranial procedures. The range is available in different sizes to accommodate procedure-specific drilling requirements. Drill selection depends on the required access, compatible cutting attachments and the operating-room setup.

MedPrax

The listed configuration is a ultrasonic harmonic surgical generator and shears system providing precise simultaneous cutting and coagulation of soft tissue and vessels up to 5mm with minimal thermal spread. It uses ultrasonic energy for surgical tissue cutting and coagulation through a compatible handpiece.

MedPrax

An insufflator delivers carbon dioxide to establish and maintain a working space during laparoscopic surgery. It supports pneumoperitoneum as part of the minimally invasive operative setup. The system is selected according to the required flow capability, pressure controls and compatibility with the intended tubing and access equipment.

MedPrax

A craniotomy drill set provides drilling instruments for bone preparation during cranial surgery. It supports operative workflows requiring cranial access and controlled bone drilling. The set configuration is selected according to the required drill sizes, attachments and compatibility with the intended drive system.

MedPrax

Surgical forceps are grasping instruments used to hold tissue or small objects during clinical procedures. The range is available in different sizes and working-end profiles for different handling requirements. They support tissue manipulation, dressing placement and instrument handling as part of a surgical setup.

MedPrax

A multi-position patient bed with manually operated crank mechanisms that adjust the head section, knee section, and overall bed height to facilitate patient positioning, comfort, and clinical access. The bed frame is constructed from tubular steel with a four-section mattress platform, collapsible side rails, and four locking castors for safe mobility. It is the primary inpatient sleeping and treatment surface in hospitals and long-term care facilities.

MedPrax

This three-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel with Hand Controller. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

The listed configuration is a comprehensive 12.1-inch color TFT multi-parameter patient monitor offering continuous real-time ECG, SpO2, NIBP, Respiration, and Dual Temperature tracking with arrhythmia analysis. It displays physiological measurements together for observation and clinical review of patient status.

MedPrax

A high-flow nasal cannula respiratory system combines electronic air-oxygen blending, active humidification and oxygen-concentration regulation. The listing specifies a flow range of 2–70 L/min. It supplies a controlled air-oxygen mixture through a nasal interface with humidification for prescribed respiratory therapy.

MedPrax

A bilevel positive airway pressure machine provides respiratory support using separate pressure levels for inhalation and exhalation. The two-pressure approach assists ventilation through an appropriate patient interface. It supports prescribed non-invasive respiratory therapy, with operating modes and interface selection matched to the clinical requirement.

MedPrax

A patient monitor displays physiological measurements for observation of patient status. This listing covers monitoring equipment for intensive care, operating theatres and hospital wards. The available measurements and accessories depend on the selected configuration and the department monitoring requirements.

MedPrax

The listed configuration is a all-in-one 3-in-1 wireless pocket handheld ultrasound probe combining Convex, Linear, and Phased Array cardiac scanning heads with wireless Wi-Fi streaming to iOS, Android, and Windows devices. It uses sound-wave imaging to support examination and review of internal anatomy.

MedPrax

A portable ultrasound system provides diagnostic imaging using sound waves in a compact, integrated format. Its transportable design supports examinations where equipment needs to move between clinical areas. It can be used for bedside and outpatient imaging workflows, with examination capabilities determined by the selected probes and installed software.

MedPrax

A Crile hemostat is a surgical clamp used to grasp vessels or tissue during hemostasis and dissection. It supports temporary clamping and tissue control before ligation or other operative steps. The instrument forms part of general surgical sets where a locking hemostatic clamp is required.

MedPrax

Adson forceps are tissue-handling instruments with toothed tips for grasping dense tissue. They support positioning of skin edges during closure and controlled handling of other firm tissue. The toothed profile distinguishes this listing from non-toothed forceps used for different grasping requirements.

MedPrax

A Frazier suction instrument is used to remove fluid from smaller or deeper operative spaces. The typically angled working profile supports access during ENT and neurosurgical procedures. It forms part of a clinical suction setup where the tip size and access angle are matched to the surgical field.

MedPrax

Potts scissors are fine surgical scissors used for incisions and dissection involving blood vessels. They support controlled cutting in vascular instrument sets where access and blade geometry matter. The working length and tip angle are selected to match the vessel exposure and procedure requirements.

MedPrax

A Kocher clamp is a toothed surgical clamp used for firm grasping of dense tissue. The toothed working end supports traction where a secure tissue hold is required. It is selected for tissue-handling tasks appropriate to a toothed clamp rather than delicate, non-penetrating grasping.

MedPrax

A surgical clip applicator is used to place clips for vessel or tissue ligation. The range includes applicator formats for open and laparoscopic approaches. The applicator must be selected with a compatible clip type and size for the intended ligation task.

MedPrax

Laparoscopic instruments are shafted surgical tools used through trocar ports during minimally invasive procedures. The range covers grasping, retraction, cutting and other operative functions according to the selected instrument. Working length, shaft diameter and tip design are matched to the access ports and surgical task.

MedPrax

An Allis clamp is a toothed surgical grasping instrument used to hold and retract tissue. The toothed jaw pattern supports a firm hold on tissue where that grasping action is appropriate. It is used for controlled traction and tissue positioning and should be distinguished from non-toothed clamps for delicate structures.

MedPrax

An Army-Navy retractor is a hand-held instrument used to expose skin and superficial tissue layers. It supports manual retraction around an incision during open surgical procedures. The instrument forms part of general surgical sets where controlled exposure of a relatively shallow operative field is required.