MedPrax

A bubble CPAP system provides continuous positive airway pressure through a breathing circuit with a submerged expiratory outlet. It supports clinically supervised non-invasive respiratory care using a compatible patient interface. This listing should be distinguished from automatic sleep-therapy CPAP devices; the pressure range, humidification arrangement and patient circuit are matched to the selected system.

This diagnostic set combines otoscope and ophthalmoscope examination heads for ear and eye assessment. The otoscope supports inspection of the external ear canal and tympanic membrane, while the ophthalmoscope supports examination of internal eye structures. It brings both examination tools into one clinical setup for outpatient and routine diagnostic workflows.

A handheld portable dental X-ray machine provides an X-ray source for dental radiographic examinations. The portable format supports positioning within a dental imaging workflow using compatible image-receptor equipment. The selected system is matched to the practice requirements for exposure settings, receptor compatibility and applicable installation or operating arrangements.

This tabletop vacuum steam autoclave is listed in 18 L and 23 L formats. The listing describes pre-vacuum processing, drying, a stainless-steel chamber, thermal printing and USB cycle-data logging. It supports steam sterilization of compatible instruments within a documented reprocessing workflow.

A compact, hand-held surgical drill for controlled bone drilling in neuro, spine, and orthopedic procedures. The pistol-grip body and keyed multi-jaw chuck support stable handling with procedure-selected drill bits. Power configuration, attachments, and sterilization protocol are confirmed during enquiry.

The listed configuration is a automated Ion-Selective Electrode (ISE) electrolyte analyzer measuring Na+, K+, Cl-, iCa++, and pH from whole blood, serum, plasma, and diluted urine in 25 seconds. It uses ion-selective-electrode measurement to support laboratory electrolyte analysis.

This mobile digital C-arm listing identifies a 5 kW X-ray system for fluoroscopic imaging. Its mobile imaging arrangement supports positioning around an operative or interventional examination area. It is intended for clinical workflows requiring procedural imaging, with detector type, image display and movement range matched to the selected installation.

A multiparameter patient monitor displays physiological measurements for observation of patient status. It supports monitoring workflows in clinical areas where staff need to review several measurements together. This listing references maternal and fetal monitoring in its title, so the required patient-monitoring or obstetric configuration should be established for the selected model.

This ICU ventilator listing is intended for adult and pediatric respiratory-support workflows. A ventilator assists breathing by controlling gas delivery through an appropriate patient circuit. The selected operating modes, patient-size limits and monitoring functions need to match the clinical requirements of the intensive-care service.

A neonatal phototherapy unit provides therapeutic light for the clinical management of neonatal jaundice. This listing identifies a height-adjustable arrangement for positioning the light source over the treatment area. It supports newborn-care workflows where the treatment distance, light-output specification and monitoring arrangements are matched to the clinical protocol.

The listed configuration is a 5-part differential hematology analyzer featuring laser flow cytometry, chemical dye impedance, 28 reportable parameters, 60 samples/hour throughput, and 10.4" color touchscreen. It supports automated blood-cell analysis and differential reporting for laboratory review.

This low-temperature sterilizer uses a hydrogen-peroxide vapor plasma process and is listed in 50 L and 100 L formats. The listed operating temperature range is 45–55°C. It supports reprocessing of compatible heat-sensitive instruments using a validated hydrogen-peroxide process.

A surgical operating microscope used for magnified visualization during microsurgical procedures. Configurations vary by specialty and may include binoculars, assistant scope, motorized zoom, coaxial illumination, camera adapters, and floor or ceiling mounts.

This six-channel ECG system supports acquisition and presentation of the electrical activity of the heart. The listing identifies synchronous acquisition for collecting signals during a cardiac examination. It forms part of an electrocardiography workflow, with lead acquisition, report format and interpretation functions confirmed for the selected model.

This listing describes a 0.5 T magnetic resonance imaging scanner for diagnostic imaging services. MRI uses a magnetic field and radiofrequency signals to produce images of internal anatomy. The system supports an imaging-department workflow, with the available examination capabilities determined by the installed coils, software and selected scanner configuration.

A TENS and EMS electrotherapy unit applies electrical stimulation through compatible electrodes. It supports clinician-directed physical-therapy workflows involving transcutaneous nerve stimulation or muscle stimulation according to the selected operating mode. The configuration is matched to the required channels, stimulation settings and electrode arrangement for the rehabilitation service.

A portable nebulizer converts liquid medication into an aerosol for inhalation through a compatible mask or mouthpiece. This listing describes a compressor-based system in a compact format. It supports prescribed respiratory-treatment workflows where the medication chamber, patient interface and operating configuration are selected for the intended therapy.

A pulse oximeter estimates peripheral oxygen saturation and measures pulse rate through a finger sensor. The listing includes an oxygen-saturation display, pulse-rate display, pulse waveform and adjustable display settings. It supports spot-check observation in clinical and prescribed home-monitoring workflows, with the readings interpreted alongside the patient assessment.

A dental steam autoclave uses pressurized steam to sterilize compatible dental instruments. It supports instrument-reprocessing workflows in dental practices and clinical sterilization areas. The selected chamber capacity, cycle types and load compatibility must suit the instruments being processed and the documentation required by the facility.

A three-ball incentive spirometer is a breathing-exercise device with a transparent chamber arrangement for visual feedback during inhalation. It is used in clinician-directed breathing-exercise and respiratory-rehabilitation workflows. This mechanical breathing trainer should be distinguished from diagnostic spirometers that measure lung-function parameters or generate pulmonary-function reports.

This ABS resuscitation trolley organizes supplies for emergency treatment in intensive care and other clinical areas. The listing specifies swivel castors for movement between care locations and red, blue or grey colour options. It supports a mobile emergency-equipment workflow, with the storage arrangement and equipment holders selected to suit the department setup.

An electric obstetric examination bed supports patient positioning during obstetric and gynecological examinations. Powered adjustment assists staff in setting the examination position and access to the patient. It is intended for maternity and outpatient examination areas, with the bed sections, adjustment range and supplied supports selected for the required examination workflow.

A medical vaccine refrigerator provides controlled-temperature storage for temperature-sensitive healthcare supplies. This listing identifies temperature-range and extended door-open alarms to support storage monitoring. It is intended for vaccine-storage workflows where temperature records, usable capacity and operating range must match the products being stored.

The listed configuration is a electric motorized patient lift hoyer hoist with ergonomic pendant control, foot-pedal adjustable base width, emergency lower stop, and padded transfer sling (200kg capacity). It assists staff with patient transfer using a compatible lifting sling and the selected lift configuration.