Medical Equipment in Cali

MedPrax

Babcock clamps are surgical grasping instruments used for handling tubular tissue, including bowel. Their rounded, fenestrated working-end pattern supports tissue positioning during open surgery. They are selected where the grasping profile needs to suit the structure being held and the operative exposure.

MedPrax

A Frazier suction instrument is used to remove fluid from smaller or deeper operative spaces. The typically angled working profile supports access during ENT and neurosurgical procedures. It forms part of a clinical suction setup where the tip size and access angle are matched to the surgical field.

MedPrax

An insufflator delivers carbon dioxide to establish and maintain a working space during laparoscopic surgery. It supports pneumoperitoneum as part of the minimally invasive operative setup. The system is selected according to the required flow capability, pressure controls and compatibility with the intended tubing and access equipment.

MedPrax

A rake retractor is a hand-held surgical instrument used to draw back tissue and expose an operative site. This listing describes a working end with sharp teeth for engaging tissue edges. It supports controlled retraction during open procedures where the clinician needs access to underlying structures.

MedPrax

A craniotomy drill set provides drilling instruments for bone preparation during cranial surgery. It supports operative workflows requiring cranial access and controlled bone drilling. The set configuration is selected according to the required drill sizes, attachments and compatibility with the intended drive system.

MedPrax

Surgical forceps are grasping instruments used to hold tissue or small objects during clinical procedures. The range is available in different sizes and working-end profiles for different handling requirements. They support tissue manipulation, dressing placement and instrument handling as part of a surgical setup.

MedPrax

This stainless steel flat hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Stainless Steel. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

A high-flow nasal cannula respiratory system combines electronic air-oxygen blending, active humidification and oxygen-concentration regulation. The listing specifies a flow range of 2–70 L/min. It supplies a controlled air-oxygen mixture through a nasal interface with humidification for prescribed respiratory therapy.

MedPrax

This three-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and Split Rails. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

The listed configuration is a modular ICU patient monitor with plug-and-play parameter slots, sidestream/mainstream EtCO2 capnography, dual invasive blood pressure (IBP), and 15-inch high-resolution touchscreen. The modular format supports configuration of monitoring parameters for intensive-care observation.

MedPrax

A bilevel positive airway pressure machine provides respiratory support using separate pressure levels for inhalation and exhalation. The two-pressure approach assists ventilation through an appropriate patient interface. It supports prescribed non-invasive respiratory therapy, with operating modes and interface selection matched to the clinical requirement.

MedPrax

A multiparameter patient monitor displays physiological measurements for observation of patient status. It supports monitoring workflows in clinical areas where staff need to review several measurements together. This listing references maternal and fetal monitoring in its title, so the required patient-monitoring or obstetric configuration should be established for the selected model.

MedPrax

This ICU ventilator listing is intended for adult and pediatric respiratory-support workflows. A ventilator assists breathing by controlling gas delivery through an appropriate patient circuit. The selected operating modes, patient-size limits and monitoring functions need to match the clinical requirements of the intensive-care service.

MedPrax

The listed configuration is a comprehensive 12.1-inch color TFT multi-parameter patient monitor offering continuous real-time ECG, SpO2, NIBP, Respiration, and Dual Temperature tracking with arrhythmia analysis. It displays physiological measurements together for observation and clinical review of patient status.

MedPrax

The listed configuration is a all-in-one 3-in-1 wireless pocket handheld ultrasound probe combining Convex, Linear, and Phased Array cardiac scanning heads with wireless Wi-Fi streaming to iOS, Android, and Windows devices. It uses sound-wave imaging to support examination and review of internal anatomy.

MedPrax

A portable ultrasound system provides diagnostic imaging using sound waves in a compact, integrated format. Its transportable design supports examinations where equipment needs to move between clinical areas. It can be used for bedside and outpatient imaging workflows, with examination capabilities determined by the selected probes and installed software.

MedPrax

A pulse oximeter estimates peripheral oxygen saturation and measures pulse rate through a finger sensor. The listing includes an oxygen-saturation display, pulse-rate display, pulse waveform and adjustable display settings. It supports spot-check observation in clinical and prescribed home-monitoring workflows, with the readings interpreted alongside the patient assessment.

MedPrax

A multi-position patient bed with manually operated crank mechanisms that adjust the head section, knee section, and overall bed height to facilitate patient positioning, comfort, and clinical access. The bed frame is constructed from tubular steel with a four-section mattress platform, collapsible side rails, and four locking castors for safe mobility. It is the primary inpatient sleeping and treatment surface in hospitals and long-term care facilities.

MedPrax

Advanced clinical anesthesia workstation featuring a high-precision pneumatically driven electronic ventilator, dual agent vaporizers (Isoflurane/Sevoflurane), integrated breathing circuit with CO2 absorber, and 10.4" color monitor.

MedPrax

A linear cutter is a surgical stapling instrument that divides tissue along a linear path and staples the cut edges. The combined cutting and stapling action supports tissue separation and reconstruction. It is used in procedures involving resection or anastomosis, with cartridge selection matched to the intended tissue.

MedPrax

A linear stapler places a linear staple line to approximate or secure tissue during surgery. This listing describes a stapling instrument without a cutting function. It supports ligation and anastomosis workflows where stapling is required separately from tissue division.

MedPrax

Trocars provide access ports through which laparoscopic instruments can enter an operative cavity. The range is available in multiple sizes to suit different instrument diameters and access requirements. They form part of the laparoscopic setup and support the working channels required for the selected procedure.

MedPrax

A Bookwalter retractor is a self-retaining surgical retraction system anchored to the operating table. The table-mounted arrangement supports sustained exposure while freeing staff from continuous manual retraction. The retractor assembly is selected to suit the operative field and the required tissue-holding positions.

MedPrax

Curved Mayo scissors are surgical cutting instruments used for tissue division and dissection. The curved blade profile allows the working end to approach tissue at an angle to the handles. They support open surgical workflows requiring a curved cutting instrument for tissue preparation and separation.

MedPrax

Straight Metzenbaum scissors are lightweight surgical scissors used for cutting and dissecting delicate soft tissue. The straight working profile supports direct access to the tissue being prepared. They are selected for fine dissection within surgical instrument sets where heavier cutting scissors are less appropriate.