Medical Equipment in Chiang Mai

MedPrax

The listed configuration is a portable/cart-based 3D/4D color Doppler ultrasound machine with multi-beam digital beamformer, PW/CW Doppler, real-time volume 4D rendering, and multi-probe connectivity. It uses sound-wave imaging to support examination and review of internal anatomy.

MedPrax

Babcock clamps are surgical grasping instruments used for handling tubular tissue, including bowel. Their rounded, fenestrated working-end pattern supports tissue positioning during open surgery. They are selected where the grasping profile needs to suit the structure being held and the operative exposure.

MedPrax

A Veress needle is an access instrument used for introducing insufflation gas during laparoscopic preparation. It forms part of the equipment used to establish pneumoperitoneum before placement of working ports. The needle length and connection format are selected to suit the clinical access technique and insufflation setup.

MedPrax

A craniotomy drill set provides drilling instruments for bone preparation during cranial surgery. It supports operative workflows requiring cranial access and controlled bone drilling. The set configuration is selected according to the required drill sizes, attachments and compatibility with the intended drive system.

MedPrax

An operating-theatre light illuminates the surgical field during operative procedures. It supports the visibility required for tissue examination, dissection and other surgical tasks. The selected light-head arrangement, mounting format and illumination controls are matched to the theatre layout and procedure requirements.

MedPrax

The listed configuration is a ultrasonic harmonic surgical generator and shears system providing precise simultaneous cutting and coagulation of soft tissue and vessels up to 5mm with minimal thermal spread. It uses ultrasonic energy for surgical tissue cutting and coagulation through a compatible handpiece.

MedPrax

The listed configuration is a 12-channel electrocardiograph with 10.1-inch color touchscreen, simultaneous 12-lead acquisition, Glasgow interpretation algorithm, and 216mm wide thermal printer. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

An insufflator delivers carbon dioxide to establish and maintain a working space during laparoscopic surgery. It supports pneumoperitoneum as part of the minimally invasive operative setup. The system is selected according to the required flow capability, pressure controls and compatibility with the intended tubing and access equipment.

MedPrax

This six-channel ECG system supports acquisition and presentation of the electrical activity of the heart. The listing identifies synchronous acquisition for collecting signals during a cardiac examination. It forms part of an electrocardiography workflow, with lead acquisition, report format and interpretation functions confirmed for the selected model.

MedPrax

Surgical forceps are grasping instruments used to hold tissue or small objects during clinical procedures. The range is available in different sizes and working-end profiles for different handling requirements. They support tissue manipulation, dressing placement and instrument handling as part of a surgical setup.

MedPrax

A multiparameter patient monitor displays physiological measurements for observation of patient status. It supports monitoring workflows in clinical areas where staff need to review several measurements together. This listing references maternal and fetal monitoring in its title, so the required patient-monitoring or obstetric configuration should be established for the selected model.

MedPrax

The listed configuration is a modular ICU patient monitor with plug-and-play parameter slots, sidestream/mainstream EtCO2 capnography, dual invasive blood pressure (IBP), and 15-inch high-resolution touchscreen. The modular format supports configuration of monitoring parameters for intensive-care observation.

MedPrax

A rake retractor is a hand-held surgical instrument used to draw back tissue and expose an operative site. This listing describes a working end with sharp teeth for engaging tissue edges. It supports controlled retraction during open procedures where the clinician needs access to underlying structures.

MedPrax

A portable ultrasound system provides diagnostic imaging using sound waves in a compact, integrated format. Its transportable design supports examinations where equipment needs to move between clinical areas. It can be used for bedside and outpatient imaging workflows, with examination capabilities determined by the selected probes and installed software.

MedPrax

A digital ambulatory Holter ECG recorder supports cardiac rhythm recording outside a short clinical examination. This listing identifies 24/48-hour monitoring and accompanying analysis software; the offered recording duration and channel configuration depend on the selected model. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

A pulse oximeter estimates peripheral oxygen saturation and measures pulse rate through a finger sensor. The listing includes an oxygen-saturation display, pulse-rate display, pulse waveform and adjustable display settings. It supports spot-check observation in clinical and prescribed home-monitoring workflows, with the readings interpreted alongside the patient assessment.

MedPrax

A Crile hemostat is a surgical clamp used to grasp vessels or tissue during hemostasis and dissection. It supports temporary clamping and tissue control before ligation or other operative steps. The instrument forms part of general surgical sets where a locking hemostatic clamp is required.

MedPrax

Bonney forceps are heavy tissue forceps used to grasp and hold thicker tissue during surgery. The instrument supports traction and stabilization where a substantial grasping profile is required. It forms part of surgical sets for tissue handling, with the selected size matched to the operative field.

MedPrax

Adson forceps are tissue-handling instruments with toothed tips for grasping dense tissue. They support positioning of skin edges during closure and controlled handling of other firm tissue. The toothed profile distinguishes this listing from non-toothed forceps used for different grasping requirements.

MedPrax

A Frazier suction instrument is used to remove fluid from smaller or deeper operative spaces. The typically angled working profile supports access during ENT and neurosurgical procedures. It forms part of a clinical suction setup where the tip size and access angle are matched to the surgical field.

MedPrax

Potts scissors are fine surgical scissors used for incisions and dissection involving blood vessels. They support controlled cutting in vascular instrument sets where access and blade geometry matter. The working length and tip angle are selected to match the vessel exposure and procedure requirements.

MedPrax

A Kocher clamp is a toothed surgical clamp used for firm grasping of dense tissue. The toothed working end supports traction where a secure tissue hold is required. It is selected for tissue-handling tasks appropriate to a toothed clamp rather than delicate, non-penetrating grasping.

MedPrax

A linear cutter is a surgical stapling instrument that divides tissue along a linear path and staples the cut edges. The combined cutting and stapling action supports tissue separation and reconstruction. It is used in procedures involving resection or anastomosis, with cartridge selection matched to the intended tissue.

MedPrax

A surgical clip applicator is used to place clips for vessel or tissue ligation. The range includes applicator formats for open and laparoscopic approaches. The applicator must be selected with a compatible clip type and size for the intended ligation task.

MedPrax

Laparoscopic instruments are shafted surgical tools used through trocar ports during minimally invasive procedures. The range covers grasping, retraction, cutting and other operative functions according to the selected instrument. Working length, shaft diameter and tip design are matched to the access ports and surgical task.