Medical Equipment in Butwal

MedPrax

The listed configuration is a modular ICU patient monitor with plug-and-play parameter slots, sidestream/mainstream EtCO2 capnography, dual invasive blood pressure (IBP), and 15-inch high-resolution touchscreen. The modular format supports configuration of monitoring parameters for intensive-care observation.

MedPrax

A high-flow nasal cannula respiratory system combines electronic air-oxygen blending, active humidification and oxygen-concentration regulation. The listing specifies a flow range of 2–70 L/min. It supplies a controlled air-oxygen mixture through a nasal interface with humidification for prescribed respiratory therapy.

MedPrax

A linear stapler places a linear staple line to approximate or secure tissue during surgery. This listing describes a stapling instrument without a cutting function. It supports ligation and anastomosis workflows where stapling is required separately from tissue division.

MedPrax

A ventilator provides mechanical respiratory support for patients who require assistance with breathing. This listing covers equipment for invasive and non-invasive ventilation workflows. The selected system is matched to the clinical requirements, available ventilation modes and intended patient interfaces.

MedPrax

Babcock clamps are surgical grasping instruments used for handling tubular tissue, including bowel. Their rounded, fenestrated working-end pattern supports tissue positioning during open surgery. They are selected where the grasping profile needs to suit the structure being held and the operative exposure.

MedPrax

An insufflator delivers carbon dioxide to establish and maintain a working space during laparoscopic surgery. It supports pneumoperitoneum as part of the minimally invasive operative setup. The system is selected according to the required flow capability, pressure controls and compatibility with the intended tubing and access equipment.

MedPrax

This six-channel ECG system supports acquisition and presentation of the electrical activity of the heart. The listing identifies synchronous acquisition for collecting signals during a cardiac examination. It forms part of an electrocardiography workflow, with lead acquisition, report format and interpretation functions confirmed for the selected model.

MedPrax

The listed configuration is a ultrasonic harmonic surgical generator and shears system providing precise simultaneous cutting and coagulation of soft tissue and vessels up to 5mm with minimal thermal spread. It uses ultrasonic energy for surgical tissue cutting and coagulation through a compatible handpiece.

MedPrax

This pediatric single-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and Side Rails. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This carbon steel single-function manual bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

An ECG machine records the electrical activity of the heart for clinical review. It supports acquisition and presentation of electrocardiogram traces during cardiac assessment. The selected channel format, reporting functions and connectivity are matched to the requirements of the examination service.

MedPrax

A craniotomy drill set provides drilling instruments for bone preparation during cranial surgery. It supports operative workflows requiring cranial access and controlled bone drilling. The set configuration is selected according to the required drill sizes, attachments and compatibility with the intended drive system.

MedPrax

A rake retractor is a hand-held surgical instrument used to draw back tissue and expose an operative site. This listing describes a working end with sharp teeth for engaging tissue edges. It supports controlled retraction during open procedures where the clinician needs access to underlying structures.

MedPrax

Neurosurgical drills are used for controlled bone drilling during cranial procedures. The range is available in different sizes to accommodate procedure-specific drilling requirements. Drill selection depends on the required access, compatible cutting attachments and the operating-room setup.

MedPrax

A digital ambulatory Holter ECG recorder supports cardiac rhythm recording outside a short clinical examination. This listing identifies 24/48-hour monitoring and accompanying analysis software; the offered recording duration and channel configuration depend on the selected model. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

A manually operated hospital bed for patient support and positioning. The listing does not specify the number of adjustment functions, dimensions, safe working load, frame material, mattress platform or castor and brake configuration. Request the model-specific datasheet to confirm these details.

MedPrax

An anesthesia workstation listing with an integrated ventilator and two vaporizers. The exact gas configuration, ventilation modes, monitoring functions, vaporizer compatibility, breathing circuit and included accessories are not specified. Confirm each item against the offered model and manufacturer documentation.

MedPrax

A Yankauer suction tube is used to remove blood and other fluids from an operative or examination field. This listing is intended primarily for surface suction and selected intra-abdominal suction tasks. It supports visibility and fluid management when connected to a compatible clinical suction system.

MedPrax

A linear cutter is a surgical stapling instrument that divides tissue along a linear path and staples the cut edges. The combined cutting and stapling action supports tissue separation and reconstruction. It is used in procedures involving resection or anastomosis, with cartridge selection matched to the intended tissue.

MedPrax

A surgical clip applicator is used to place clips for vessel or tissue ligation. The range includes applicator formats for open and laparoscopic approaches. The applicator must be selected with a compatible clip type and size for the intended ligation task.

MedPrax

A Deaver retractor is a hand-held surgical instrument used to draw back the abdominal wall and deeper tissue. Its retraction function supports exposure of an operative field during open procedures. The selected blade size and working length are matched to the depth and extent of the required access.

MedPrax

Curved Metzenbaum scissors are lightweight surgical scissors used for cutting and dissecting delicate soft tissue. The curved working profile supports access to tissue planes at an angle to the handles. They are used in fine-dissection workflows where the blade shape is selected to suit the operative approach.

MedPrax

A Frazier suction instrument is used to remove fluid from smaller or deeper operative spaces. The typically angled working profile supports access during ENT and neurosurgical procedures. It forms part of a clinical suction setup where the tip size and access angle are matched to the surgical field.

MedPrax

Curved Mayo scissors are surgical cutting instruments used for tissue division and dissection. The curved blade profile allows the working end to approach tissue at an angle to the handles. They support open surgical workflows requiring a curved cutting instrument for tissue preparation and separation.

MedPrax

Straight Metzenbaum scissors are lightweight surgical scissors used for cutting and dissecting delicate soft tissue. The straight working profile supports direct access to the tissue being prepared. They are selected for fine dissection within surgical instrument sets where heavier cutting scissors are less appropriate.