Medical Equipment in Hyderabad

MedPrax

This two-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS Panels. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

An anesthesia workstation supports delivery of anesthetic gases and management of ventilation during surgery. It forms part of the operating-theatre anesthesia setup alongside the required patient monitoring equipment. The selected configuration is matched to the intended breathing circuit, vaporizers and ventilation requirements.

MedPrax

A ventilator provides mechanical respiratory support for patients who require assistance with breathing. This listing covers equipment for invasive and non-invasive ventilation workflows. The selected system is matched to the clinical requirements, available ventilation modes and intended patient interfaces.

MedPrax

This five-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

An operating-theatre light illuminates the surgical field during operative procedures. It supports the visibility required for tissue examination, dissection and other surgical tasks. The selected light-head arrangement, mounting format and illumination controls are matched to the theatre layout and procedure requirements.

MedPrax

This ICU ventilator listing is intended for adult and pediatric respiratory-support workflows. A ventilator assists breathing by controlling gas delivery through an appropriate patient circuit. The selected operating modes, patient-size limits and monitoring functions need to match the clinical requirements of the intensive-care service.

MedPrax

The listed configuration is a comprehensive 12.1-inch color TFT multi-parameter patient monitor offering continuous real-time ECG, SpO2, NIBP, Respiration, and Dual Temperature tracking with arrhythmia analysis. It displays physiological measurements together for observation and clinical review of patient status.

MedPrax

A high-flow nasal cannula respiratory system combines electronic air-oxygen blending, active humidification and oxygen-concentration regulation. The listing specifies a flow range of 2–70 L/min. It supplies a controlled air-oxygen mixture through a nasal interface with humidification for prescribed respiratory therapy.

MedPrax

A multiparameter patient monitor displays physiological measurements for observation of patient status. It supports monitoring workflows in clinical areas where staff need to review several measurements together. This listing references maternal and fetal monitoring in its title, so the required patient-monitoring or obstetric configuration should be established for the selected model.

MedPrax

An infusion pump controls delivery of fluids, medication or nutrition through an infusion line. It supports prescribed infusion workflows where delivery rate and volume need to be managed. The pump configuration is selected with compatible administration sets and the functions required by the treatment service.

MedPrax

A defibrillator delivers controlled electrical therapy as part of emergency cardiac care. It is used in resuscitation workflows where the required rhythm assessment and therapy functions must be available. The selected system and accessories are matched to the clinical setting and the intended defibrillation configuration.

MedPrax

An electrosurgical cautery unit supplies high-frequency electrical energy for tissue cutting and coagulation during surgery. It supports tissue dissection and hemostasis as part of an operative workflow. The required output modes, power rating and compatible electrodes depend on the selected system and procedure.

MedPrax

DeBakey forceps are surgical grasping instruments used for controlled handling of tissue during dissection. The DeBakey jaw pattern is commonly selected for delicate tissue and vascular handling. The instrument supports traction and positioning in surgical workflows where the working-end profile is important.

MedPrax

These non-toothed tissue forceps are used to grasp tissue and apply traction during dissection. The working ends support fine handling without the penetrating teeth used on toothed forceps. They are selected for surgical tasks where the jaw profile and grasping pressure must be matched to the tissue.

MedPrax

This video endoscopic instrument provides visualization for urinary-tract examinations and urological procedures. The video format supports inspection and review of structures within the intended examination area. The precise scope type, intended anatomy, insertion dimensions and working-channel configuration should be established for the selected model.

MedPrax

A rake retractor is a hand-held surgical instrument used to draw back tissue and expose an operative site. This listing describes a working end with sharp teeth for engaging tissue edges. It supports controlled retraction during open procedures where the clinician needs access to underlying structures.

MedPrax

Neurosurgical drills are used for controlled bone drilling during cranial procedures. The range is available in different sizes to accommodate procedure-specific drilling requirements. Drill selection depends on the required access, compatible cutting attachments and the operating-room setup.

MedPrax

This portable intubation scope provides endoscopic visualization for airway examination and assisted intubation. Built-in recording and screenshot functions support documentation of the examination. The MP-IS listing specifies a 350 mm working length, modifiable on request, with several outer-diameter and working-channel options.

MedPrax

Surgical forceps are grasping instruments used to hold tissue or small objects during clinical procedures. The range is available in different sizes and working-end profiles for different handling requirements. They support tissue manipulation, dressing placement and instrument handling as part of a surgical setup.

MedPrax

An electric obstetric examination bed supports patient positioning during obstetric and gynecological examinations. Powered adjustment assists staff in setting the examination position and access to the patient. It is intended for maternity and outpatient examination areas, with the bed sections, adjustment range and supplied supports selected for the required examination workflow.

MedPrax

The listed configuration is a volumetric IV infusion pump with open-system calibration, ultrasonic air-in-line sensor, double CPU safety architecture, and horizontal peristaltic mechanism. It manages infusion delivery through compatible administration tubing according to the prescribed rate and volume.

MedPrax

This ABS resuscitation trolley organizes supplies for emergency treatment in intensive care and other clinical areas. The listing specifies swivel castors for movement between care locations and red, blue or grey colour options. It supports a mobile emergency-equipment workflow, with the storage arrangement and equipment holders selected to suit the department setup.

MedPrax

This three-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel with Hand Controller. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This pediatric single-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and Side Rails. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This three-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel with Overbed Table. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.