Medical Equipment in Pune

MedPrax

An ECG machine records the electrical activity of the heart for clinical review. It supports acquisition and presentation of electrocardiogram traces during cardiac assessment. The selected channel format, reporting functions and connectivity are matched to the requirements of the examination service.

MedPrax

A defibrillator delivers controlled electrical therapy as part of emergency cardiac care. It is used in resuscitation workflows where the required rhythm assessment and therapy functions must be available. The selected system and accessories are matched to the clinical setting and the intended defibrillation configuration.

MedPrax

The listed configuration is a modular ICU patient monitor with plug-and-play parameter slots, sidestream/mainstream EtCO2 capnography, dual invasive blood pressure (IBP), and 15-inch high-resolution touchscreen. The modular format supports configuration of monitoring parameters for intensive-care observation.

MedPrax

A multiparameter patient monitor displays physiological measurements for observation of patient status. It supports monitoring workflows in clinical areas where staff need to review several measurements together. This listing references maternal and fetal monitoring in its title, so the required patient-monitoring or obstetric configuration should be established for the selected model.

MedPrax

A ventilator provides mechanical respiratory support for patients who require assistance with breathing. This listing covers equipment for invasive and non-invasive ventilation workflows. The selected system is matched to the clinical requirements, available ventilation modes and intended patient interfaces.

MedPrax

A hemodialysis machine supports extracorporeal blood treatment when kidney function is impaired. It is used with a dialysis circuit and dialyzer to help remove waste products and excess fluid from the blood. The equipment forms part of a supervised renal-care workflow in dialysis departments and hospital treatment units.

MedPrax

An X-ray machine produces radiographic images for clinical examination and diagnostic review. It supports imaging workflows in which anatomical structures need to be assessed using radiography. The selected generator, detector arrangement and positioning equipment are matched to the intended examinations and installation.

MedPrax

An infusion pump controls delivery of fluids, medication or nutrition through an infusion line. It supports prescribed infusion workflows where delivery rate and volume need to be managed. The pump configuration is selected with compatible administration sets and the functions required by the treatment service.

MedPrax

A bilevel positive airway pressure machine provides respiratory support using separate pressure levels for inhalation and exhalation. The two-pressure approach assists ventilation through an appropriate patient interface. It supports prescribed non-invasive respiratory therapy, with operating modes and interface selection matched to the clinical requirement.

MedPrax

A syringe pump controls medication or fluid delivery by advancing a syringe at a set rate. It supports infusion workflows requiring controlled delivery of smaller volumes. The selected pump must accommodate the intended syringe sizes and the dosing functions required by the clinical service.

MedPrax

A digital ambulatory Holter ECG recorder supports cardiac rhythm recording outside a short clinical examination. This listing identifies 24/48-hour monitoring and accompanying analysis software; the offered recording duration and channel configuration depend on the selected model. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

A fetal monitor records fetal heart rate and uterine activity during maternity assessment. It supports observation and review of these measurements within obstetric care workflows. The selected monitoring configuration and transducers are matched to the department requirements and intended examination setting.

MedPrax

This diagnostic set combines otoscope and ophthalmoscope examination heads for ear and eye assessment. The otoscope supports inspection of the external ear canal and tympanic membrane, while the ophthalmoscope supports examination of internal eye structures. It brings both examination tools into one clinical setup for outpatient and routine diagnostic workflows.

MedPrax

A cartridge-based point-of-care analyzer provides blood-gas and electrolyte measurements from a small blood sample. It supports near-patient analysis of blood-gas and electrolyte measurements for clinical review.

MedPrax

A patient monitor displays physiological measurements for observation of patient status. This listing covers monitoring equipment for intensive care, operating theatres and hospital wards. The available measurements and accessories depend on the selected configuration and the department monitoring requirements.

MedPrax

This ICU ventilator listing is intended for adult and pediatric respiratory-support workflows. A ventilator assists breathing by controlling gas delivery through an appropriate patient circuit. The selected operating modes, patient-size limits and monitoring functions need to match the clinical requirements of the intensive-care service.

MedPrax

An anesthesia workstation supports delivery of anesthetic gases and management of ventilation during surgery. It forms part of the operating-theatre anesthesia setup alongside the required patient monitoring equipment. The selected configuration is matched to the intended breathing circuit, vaporizers and ventilation requirements.

MedPrax

Deluxe 5-function electric ICU hospital bed with motorized backrest, knee rest, height elevation, Trendelenburg / Reverse Trendelenburg, ABS split side-rails with built-in controls, and manual/electric CPR quick release.

MedPrax

This two-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel with Integrated Cranks. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

The listed configuration is a volumetric IV infusion pump with open-system calibration, ultrasonic air-in-line sensor, double CPU safety architecture, and horizontal peristaltic mechanism. It manages infusion delivery through compatible administration tubing according to the prescribed rate and volume.

MedPrax

A Yankauer suction tube is used to remove blood and other fluids from an operative or examination field. This listing is intended primarily for surface suction and selected intra-abdominal suction tasks. It supports visibility and fluid management when connected to a compatible clinical suction system.

MedPrax

A Frazier suction instrument is used to remove fluid from smaller or deeper operative spaces. The typically angled working profile supports access during ENT and neurosurgical procedures. It forms part of a clinical suction setup where the tip size and access angle are matched to the surgical field.

MedPrax

This ABS resuscitation trolley organizes supplies for emergency treatment in intensive care and other clinical areas. The listing specifies swivel castors for movement between care locations and red, blue or grey colour options. It supports a mobile emergency-equipment workflow, with the storage arrangement and equipment holders selected to suit the department setup.

MedPrax

A multi-position patient bed with manually operated crank mechanisms that adjust the head section, knee section, and overall bed height to facilitate patient positioning, comfort, and clinical access. The bed frame is constructed from tubular steel with a four-section mattress platform, collapsible side rails, and four locking castors for safe mobility. It is the primary inpatient sleeping and treatment surface in hospitals and long-term care facilities.

MedPrax

This six-channel ECG system supports acquisition and presentation of the electrical activity of the heart. The listing identifies synchronous acquisition for collecting signals during a cardiac examination. It forms part of an electrocardiography workflow, with lead acquisition, report format and interpretation functions confirmed for the selected model.