Medical Equipment in Kolkata

MedPrax

A compact, hand-held surgical drill for controlled bone drilling in neuro, spine, and orthopedic procedures. The pistol-grip body and keyed multi-jaw chuck support stable handling with procedure-selected drill bits. Power configuration, attachments, and sterilization protocol are confirmed during enquiry.

MedPrax

A large-volume, piston-type syringe—typically 50 mL to 100 mL capacity—with a catheter-tip or bulb-tip nozzle, used for wound irrigation, bladder irrigation, and enteral feeding bolus delivery. Constructed from autoclavable polypropylene or stainless steel, the reusable irrigation syringe generates a controlled, adjustable stream of irrigating fluid to cleanse wounds, lavage body cavities, and flush drainage tubes.

MedPrax

An insufflator delivers carbon dioxide to establish and maintain a working space during laparoscopic surgery. It supports pneumoperitoneum as part of the minimally invasive operative setup. The system is selected according to the required flow capability, pressure controls and compatibility with the intended tubing and access equipment.

MedPrax

Surgical forceps are grasping instruments used to hold tissue or small objects during clinical procedures. The range is available in different sizes and working-end profiles for different handling requirements. They support tissue manipulation, dressing placement and instrument handling as part of a surgical setup.

MedPrax

An X-ray machine produces radiographic images for clinical examination and diagnostic review. It supports imaging workflows in which anatomical structures need to be assessed using radiography. The selected generator, detector arrangement and positioning equipment are matched to the intended examinations and installation.

MedPrax

The listed configuration is a modular ICU patient monitor with plug-and-play parameter slots, sidestream/mainstream EtCO2 capnography, dual invasive blood pressure (IBP), and 15-inch high-resolution touchscreen. The modular format supports configuration of monitoring parameters for intensive-care observation.

MedPrax

The listed configuration is a 12-channel electrocardiograph with 10.1-inch color touchscreen, simultaneous 12-lead acquisition, Glasgow interpretation algorithm, and 216mm wide thermal printer. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

The listed configuration is a all-in-one 3-in-1 wireless pocket handheld ultrasound probe combining Convex, Linear, and Phased Array cardiac scanning heads with wireless Wi-Fi streaming to iOS, Android, and Windows devices. It uses sound-wave imaging to support examination and review of internal anatomy.

MedPrax

A hemodialysis machine supports extracorporeal blood treatment when kidney function is impaired. It is used with a dialysis circuit and dialyzer to help remove waste products and excess fluid from the blood. The equipment forms part of a supervised renal-care workflow in dialysis departments and hospital treatment units.

MedPrax

A bilevel positive airway pressure machine provides respiratory support using separate pressure levels for inhalation and exhalation. The two-pressure approach assists ventilation through an appropriate patient interface. It supports prescribed non-invasive respiratory therapy, with operating modes and interface selection matched to the clinical requirement.

MedPrax

A cartridge-based point-of-care analyzer provides blood-gas and electrolyte measurements from a small blood sample. It supports near-patient analysis of blood-gas and electrolyte measurements for clinical review.

MedPrax

This ICU ventilator listing is intended for adult and pediatric respiratory-support workflows. A ventilator assists breathing by controlling gas delivery through an appropriate patient circuit. The selected operating modes, patient-size limits and monitoring functions need to match the clinical requirements of the intensive-care service.

MedPrax

An anesthesia workstation supports delivery of anesthetic gases and management of ventilation during surgery. It forms part of the operating-theatre anesthesia setup alongside the required patient monitoring equipment. The selected configuration is matched to the intended breathing circuit, vaporizers and ventilation requirements.

MedPrax

This ABS resuscitation trolley organizes supplies for emergency treatment in intensive care and other clinical areas. The listing specifies swivel castors for movement between care locations and red, blue or grey colour options. It supports a mobile emergency-equipment workflow, with the storage arrangement and equipment holders selected to suit the department setup.

MedPrax

A syringe pump controls medication or fluid delivery by advancing a syringe at a set rate. It supports infusion workflows requiring controlled delivery of smaller volumes. The selected pump must accommodate the intended syringe sizes and the dosing functions required by the clinical service.

MedPrax

The listed configuration is a volumetric IV infusion pump with open-system calibration, ultrasonic air-in-line sensor, double CPU safety architecture, and horizontal peristaltic mechanism. It manages infusion delivery through compatible administration tubing according to the prescribed rate and volume.

MedPrax

A fetal monitor records fetal heart rate and uterine activity during maternity assessment. It supports observation and review of these measurements within obstetric care workflows. The selected monitoring configuration and transducers are matched to the department requirements and intended examination setting.

MedPrax

The listed configuration is a biphasic defibrillator monitor with manual defibrillation, automated external defibrillator (AED) mode, synchronized cardioversion, transcutaneous external pacing, and 7-inch color display. It combines rhythm observation and electrical therapy functions for emergency cardiac-care workflows.

MedPrax

A portable ultrasound system provides diagnostic imaging using sound waves in a compact, integrated format. Its transportable design supports examinations where equipment needs to move between clinical areas. It can be used for bedside and outpatient imaging workflows, with examination capabilities determined by the selected probes and installed software.

MedPrax

A mobile C-arm provides fluoroscopic imaging during surgical and interventional procedures. Its C-shaped imaging arrangement supports positioning around the area being examined. It forms part of an intraoperative imaging workflow, with detector format and system configuration selected for the intended clinical use.

MedPrax

Deluxe 5-function electric ICU hospital bed with motorized backrest, knee rest, height elevation, Trendelenburg / Reverse Trendelenburg, ABS split side-rails with built-in controls, and manual/electric CPR quick release.

MedPrax

This listing describes a 0.5 T magnetic resonance imaging scanner for diagnostic imaging services. MRI uses a magnetic field and radiofrequency signals to produce images of internal anatomy. The system supports an imaging-department workflow, with the available examination capabilities determined by the installed coils, software and selected scanner configuration.

MedPrax

A video rhino laryngoscope provides endoscopic visualization for examination of the nasal passages, pharynx and larynx. It supports ENT assessment and review of upper-airway anatomy through a video image. The instrument is used in clinical examination workflows where direct visualization helps the clinician assess the area of interest.

MedPrax

This five-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS with IV Pole. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This anti-bedsore alternating pressure air mattress provides an alternating-pressure support surface for patient care. The listed construction uses Medical Grade PVC/TPU. The mattress forms part of a clinical pressure-management plan and is selected for compatibility with the intended bed.