Medical Equipment in Galle

MedPrax

A ventilator provides mechanical respiratory support for patients who require assistance with breathing. This listing covers equipment for invasive and non-invasive ventilation workflows. The selected system is matched to the clinical requirements, available ventilation modes and intended patient interfaces.

MedPrax

The listed configuration is a 12-channel electrocardiograph with 10.1-inch color touchscreen, simultaneous 12-lead acquisition, Glasgow interpretation algorithm, and 216mm wide thermal printer. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

A compact, hand-held surgical drill for controlled bone drilling in neuro, spine, and orthopedic procedures. The pistol-grip body and keyed multi-jaw chuck support stable handling with procedure-selected drill bits. Power configuration, attachments, and sterilization protocol are confirmed during enquiry.

MedPrax

A Frazier suction instrument is used to remove fluid from smaller or deeper operative spaces. The typically angled working profile supports access during ENT and neurosurgical procedures. It forms part of a clinical suction setup where the tip size and access angle are matched to the surgical field.

MedPrax

A high-flow nasal cannula respiratory system combines electronic air-oxygen blending, active humidification and oxygen-concentration regulation. The listing specifies a flow range of 2–70 L/min. It supplies a controlled air-oxygen mixture through a nasal interface with humidification for prescribed respiratory therapy.

MedPrax

This three-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel with Hand Controller. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This six-channel ECG system supports acquisition and presentation of the electrical activity of the heart. The listing identifies synchronous acquisition for collecting signals during a cardiac examination. It forms part of an electrocardiography workflow, with lead acquisition, report format and interpretation functions confirmed for the selected model.

MedPrax

A patient monitor displays physiological measurements for observation of patient status. This listing covers monitoring equipment for intensive care, operating theatres and hospital wards. The available measurements and accessories depend on the selected configuration and the department monitoring requirements.

MedPrax

A multiparameter patient monitor displays physiological measurements for observation of patient status. It supports monitoring workflows in clinical areas where staff need to review several measurements together. This listing references maternal and fetal monitoring in its title, so the required patient-monitoring or obstetric configuration should be established for the selected model.

MedPrax

This abs flat hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses ABS Head/Footboards and Carbon Steel. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This ICU ventilator listing is intended for adult and pediatric respiratory-support workflows. A ventilator assists breathing by controlling gas delivery through an appropriate patient circuit. The selected operating modes, patient-size limits and monitoring functions need to match the clinical requirements of the intensive-care service.

MedPrax

Surgical forceps are grasping instruments used to hold tissue or small objects during clinical procedures. The range is available in different sizes and working-end profiles for different handling requirements. They support tissue manipulation, dressing placement and instrument handling as part of a surgical setup.

MedPrax

The listed configuration is a ultrasonic harmonic surgical generator and shears system providing precise simultaneous cutting and coagulation of soft tissue and vessels up to 5mm with minimal thermal spread. It uses ultrasonic energy for surgical tissue cutting and coagulation through a compatible handpiece.

MedPrax

A pulse oximeter estimates peripheral oxygen saturation and measures pulse rate through a finger sensor. The listing includes an oxygen-saturation display, pulse-rate display, pulse waveform and adjustable display settings. It supports spot-check observation in clinical and prescribed home-monitoring workflows, with the readings interpreted alongside the patient assessment.

MedPrax

A multi-position patient bed with manually operated crank mechanisms that adjust the head section, knee section, and overall bed height to facilitate patient positioning, comfort, and clinical access. The bed frame is constructed from tubular steel with a four-section mattress platform, collapsible side rails, and four locking castors for safe mobility. It is the primary inpatient sleeping and treatment surface in hospitals and long-term care facilities.

MedPrax

Curved Metzenbaum scissors are lightweight surgical scissors used for cutting and dissecting delicate soft tissue. The curved working profile supports access to tissue planes at an angle to the handles. They are used in fine-dissection workflows where the blade shape is selected to suit the operative approach.

MedPrax

A linear stapler places a linear staple line to approximate or secure tissue during surgery. This listing describes a stapling instrument without a cutting function. It supports ligation and anastomosis workflows where stapling is required separately from tissue division.

MedPrax

Trocars provide access ports through which laparoscopic instruments can enter an operative cavity. The range is available in multiple sizes to suit different instrument diameters and access requirements. They form part of the laparoscopic setup and support the working channels required for the selected procedure.

MedPrax

Babcock clamps are surgical grasping instruments used for handling tubular tissue, including bowel. Their rounded, fenestrated working-end pattern supports tissue positioning during open surgery. They are selected where the grasping profile needs to suit the structure being held and the operative exposure.

MedPrax

Straight iris scissors are fine cutting instruments used for delicate dissection and trimming fine sutures. The straight working end supports small, controlled cuts in accessible tissue or material. They form part of instrument sets for procedures requiring a compact scissors profile and fine cutting control.

MedPrax

A Veress needle is an access instrument used for introducing insufflation gas during laparoscopic preparation. It forms part of the equipment used to establish pneumoperitoneum before placement of working ports. The needle length and connection format are selected to suit the clinical access technique and insufflation setup.

MedPrax

This two-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel with Integrated Cranks. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This two-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and Polypropylene. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

DeBakey forceps are surgical grasping instruments used for controlled handling of tissue during dissection. The DeBakey jaw pattern is commonly selected for delicate tissue and vascular handling. The instrument supports traction and positioning in surgical workflows where the working-end profile is important.

MedPrax

Bonney forceps are heavy tissue forceps used to grasp and hold thicker tissue during surgery. The instrument supports traction and stabilization where a substantial grasping profile is required. It forms part of surgical sets for tissue handling, with the selected size matched to the operative field.