Medical Equipment in Toronto

MedPrax

This three-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel with Hand Controller. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

Deluxe 5-function electric ICU hospital bed with motorized backrest, knee rest, height elevation, Trendelenburg / Reverse Trendelenburg, ABS split side-rails with built-in controls, and manual/electric CPR quick release.

MedPrax

A Veress needle is an access instrument used for introducing insufflation gas during laparoscopic preparation. It forms part of the equipment used to establish pneumoperitoneum before placement of working ports. The needle length and connection format are selected to suit the clinical access technique and insufflation setup.

MedPrax

An Allis clamp is a toothed surgical grasping instrument used to hold and retract tissue. The toothed jaw pattern supports a firm hold on tissue where that grasping action is appropriate. It is used for controlled traction and tissue positioning and should be distinguished from non-toothed clamps for delicate structures.

MedPrax

The listed configuration is a biphasic defibrillator monitor with manual defibrillation, automated external defibrillator (AED) mode, synchronized cardioversion, transcutaneous external pacing, and 7-inch color display. It combines rhythm observation and electrical therapy functions for emergency cardiac-care workflows.

MedPrax

A craniotomy drill set provides drilling instruments for bone preparation during cranial surgery. It supports operative workflows requiring cranial access and controlled bone drilling. The set configuration is selected according to the required drill sizes, attachments and compatibility with the intended drive system.

MedPrax

Neurosurgical drills are used for controlled bone drilling during cranial procedures. The range is available in different sizes to accommodate procedure-specific drilling requirements. Drill selection depends on the required access, compatible cutting attachments and the operating-room setup.

MedPrax

The listed configuration is a 12-channel electrocardiograph with 10.1-inch color touchscreen, simultaneous 12-lead acquisition, Glasgow interpretation algorithm, and 216mm wide thermal printer. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

This six-channel ECG system supports acquisition and presentation of the electrical activity of the heart. The listing identifies synchronous acquisition for collecting signals during a cardiac examination. It forms part of an electrocardiography workflow, with lead acquisition, report format and interpretation functions confirmed for the selected model.

MedPrax

The listed configuration is a comprehensive 12.1-inch color TFT multi-parameter patient monitor offering continuous real-time ECG, SpO2, NIBP, Respiration, and Dual Temperature tracking with arrhythmia analysis. It displays physiological measurements together for observation and clinical review of patient status.

MedPrax

Surgical forceps are grasping instruments used to hold tissue or small objects during clinical procedures. The range is available in different sizes and working-end profiles for different handling requirements. They support tissue manipulation, dressing placement and instrument handling as part of a surgical setup.

MedPrax

The listed configuration is a modular ICU patient monitor with plug-and-play parameter slots, sidestream/mainstream EtCO2 capnography, dual invasive blood pressure (IBP), and 15-inch high-resolution touchscreen. The modular format supports configuration of monitoring parameters for intensive-care observation.

MedPrax

A rake retractor is a hand-held surgical instrument used to draw back tissue and expose an operative site. This listing describes a working end with sharp teeth for engaging tissue edges. It supports controlled retraction during open procedures where the clinician needs access to underlying structures.

MedPrax

A multi-position patient bed with manually operated crank mechanisms that adjust the head section, knee section, and overall bed height to facilitate patient positioning, comfort, and clinical access. The bed frame is constructed from tubular steel with a four-section mattress platform, collapsible side rails, and four locking castors for safe mobility. It is the primary inpatient sleeping and treatment surface in hospitals and long-term care facilities.

MedPrax

A digital ambulatory Holter ECG recorder supports cardiac rhythm recording outside a short clinical examination. This listing identifies 24/48-hour monitoring and accompanying analysis software; the offered recording duration and channel configuration depend on the selected model. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

A pulse oximeter estimates peripheral oxygen saturation and measures pulse rate through a finger sensor. The listing includes an oxygen-saturation display, pulse-rate display, pulse waveform and adjustable display settings. It supports spot-check observation in clinical and prescribed home-monitoring workflows, with the readings interpreted alongside the patient assessment.

MedPrax

This two-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and Polypropylene. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This five-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

Bonney forceps are heavy tissue forceps used to grasp and hold thicker tissue during surgery. The instrument supports traction and stabilization where a substantial grasping profile is required. It forms part of surgical sets for tissue handling, with the selected size matched to the operative field.

MedPrax

This pediatric single-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and Side Rails. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

Potts scissors are fine surgical scissors used for incisions and dissection involving blood vessels. They support controlled cutting in vascular instrument sets where access and blade geometry matter. The working length and tip angle are selected to match the vessel exposure and procedure requirements.

MedPrax

A Kocher clamp is a toothed surgical clamp used for firm grasping of dense tissue. The toothed working end supports traction where a secure tissue hold is required. It is selected for tissue-handling tasks appropriate to a toothed clamp rather than delicate, non-penetrating grasping.

MedPrax

This three-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel with Overbed Table. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

A surgical clip applicator is used to place clips for vessel or tissue ligation. The range includes applicator formats for open and laparoscopic approaches. The applicator must be selected with a compatible clip type and size for the intended ligation task.

MedPrax

Laparoscopic instruments are shafted surgical tools used through trocar ports during minimally invasive procedures. The range covers grasping, retraction, cutting and other operative functions according to the selected instrument. Working length, shaft diameter and tip design are matched to the access ports and surgical task.