Medical Equipment in Vancouver

MedPrax

The listed configuration is a ultrasonic harmonic surgical generator and shears system providing precise simultaneous cutting and coagulation of soft tissue and vessels up to 5mm with minimal thermal spread. It uses ultrasonic energy for surgical tissue cutting and coagulation through a compatible handpiece.

MedPrax

This two-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and Polypropylene. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

A Crile hemostat is a surgical clamp used to grasp vessels or tissue during hemostasis and dissection. It supports temporary clamping and tissue control before ligation or other operative steps. The instrument forms part of general surgical sets where a locking hemostatic clamp is required.

MedPrax

This five-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

A circular cutter is a surgical instrument that creates a circular tissue cut and staple line. It supports re-anastomosis of hollow structures, including bowel, within an operative reconstruction workflow. The selected diameter and compatible components need to suit the intended anatomy and tissue-joining approach.

MedPrax

The listed configuration is a 12-channel electrocardiograph with 10.1-inch color touchscreen, simultaneous 12-lead acquisition, Glasgow interpretation algorithm, and 216mm wide thermal printer. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

An insufflator delivers carbon dioxide to establish and maintain a working space during laparoscopic surgery. It supports pneumoperitoneum as part of the minimally invasive operative setup. The system is selected according to the required flow capability, pressure controls and compatibility with the intended tubing and access equipment.

MedPrax

A craniotomy drill set provides drilling instruments for bone preparation during cranial surgery. It supports operative workflows requiring cranial access and controlled bone drilling. The set configuration is selected according to the required drill sizes, attachments and compatibility with the intended drive system.

MedPrax

This six-channel ECG system supports acquisition and presentation of the electrical activity of the heart. The listing identifies synchronous acquisition for collecting signals during a cardiac examination. It forms part of an electrocardiography workflow, with lead acquisition, report format and interpretation functions confirmed for the selected model.

MedPrax

The listed configuration is a comprehensive 12.1-inch color TFT multi-parameter patient monitor offering continuous real-time ECG, SpO2, NIBP, Respiration, and Dual Temperature tracking with arrhythmia analysis. It displays physiological measurements together for observation and clinical review of patient status.

MedPrax

Surgical forceps are grasping instruments used to hold tissue or small objects during clinical procedures. The range is available in different sizes and working-end profiles for different handling requirements. They support tissue manipulation, dressing placement and instrument handling as part of a surgical setup.

MedPrax

The listed configuration is a modular ICU patient monitor with plug-and-play parameter slots, sidestream/mainstream EtCO2 capnography, dual invasive blood pressure (IBP), and 15-inch high-resolution touchscreen. The modular format supports configuration of monitoring parameters for intensive-care observation.

MedPrax

A rake retractor is a hand-held surgical instrument used to draw back tissue and expose an operative site. This listing describes a working end with sharp teeth for engaging tissue edges. It supports controlled retraction during open procedures where the clinician needs access to underlying structures.

MedPrax

A defibrillator delivers controlled electrical therapy as part of emergency cardiac care. It is used in resuscitation workflows where the required rhythm assessment and therapy functions must be available. The selected system and accessories are matched to the clinical setting and the intended defibrillation configuration.

MedPrax

A patient monitor displays physiological measurements for observation of patient status. This listing covers monitoring equipment for intensive care, operating theatres and hospital wards. The available measurements and accessories depend on the selected configuration and the department monitoring requirements.

MedPrax

A multi-position patient bed with manually operated crank mechanisms that adjust the head section, knee section, and overall bed height to facilitate patient positioning, comfort, and clinical access. The bed frame is constructed from tubular steel with a four-section mattress platform, collapsible side rails, and four locking castors for safe mobility. It is the primary inpatient sleeping and treatment surface in hospitals and long-term care facilities.

MedPrax

A digital ambulatory Holter ECG recorder supports cardiac rhythm recording outside a short clinical examination. This listing identifies 24/48-hour monitoring and accompanying analysis software; the offered recording duration and channel configuration depend on the selected model. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

This three-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS Panels. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

A Frazier suction instrument is used to remove fluid from smaller or deeper operative spaces. The typically angled working profile supports access during ENT and neurosurgical procedures. It forms part of a clinical suction setup where the tip size and access angle are matched to the surgical field.

MedPrax

A Kocher clamp is a toothed surgical clamp used for firm grasping of dense tissue. The toothed working end supports traction where a secure tissue hold is required. It is selected for tissue-handling tasks appropriate to a toothed clamp rather than delicate, non-penetrating grasping.

MedPrax

This stainless steel flat hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Stainless Steel. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

Laparoscopic instruments are shafted surgical tools used through trocar ports during minimally invasive procedures. The range covers grasping, retraction, cutting and other operative functions according to the selected instrument. Working length, shaft diameter and tip design are matched to the access ports and surgical task.

MedPrax

A flat, channelled instrument with a longitudinal groove along its surface and a probe-tipped end, used to guide a scalpel or scissors along a safe path during tissue dissection and incision. The groove cradles the cutting blade, preventing it from deviating laterally and protecting underlying structures from inadvertent injury.

MedPrax

This five-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel with Integrated Panel. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This manual sectional leg-bending hospital bed (middle section) supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.