Medical Equipment in Phuntsholing

MedPrax

The listed configuration is a modular ICU patient monitor with plug-and-play parameter slots, sidestream/mainstream EtCO2 capnography, dual invasive blood pressure (IBP), and 15-inch high-resolution touchscreen. The modular format supports configuration of monitoring parameters for intensive-care observation.

MedPrax

A high-flow nasal cannula respiratory system combines electronic air-oxygen blending, active humidification and oxygen-concentration regulation. The listing specifies a flow range of 2–70 L/min. It supplies a controlled air-oxygen mixture through a nasal interface with humidification for prescribed respiratory therapy.

MedPrax

A craniotomy drill set provides drilling instruments for bone preparation during cranial surgery. It supports operative workflows requiring cranial access and controlled bone drilling. The set configuration is selected according to the required drill sizes, attachments and compatibility with the intended drive system.

MedPrax

A patient monitor displays physiological measurements for observation of patient status. This listing covers monitoring equipment for intensive care, operating theatres and hospital wards. The available measurements and accessories depend on the selected configuration and the department monitoring requirements.

MedPrax

A reusable irrigation syringe for controlled delivery of irrigation fluid. The listing does not state its capacity, material, tip or connector type, graduations, or validated reprocessing method. Confirm the exact variant and manufacturer instructions for use before purchase.

MedPrax

A multiparameter patient monitor displays physiological measurements for observation of patient status. It supports monitoring workflows in clinical areas where staff need to review several measurements together. This listing references maternal and fetal monitoring in its title, so the required patient-monitoring or obstetric configuration should be established for the selected model.

MedPrax

Russian forceps are tissue-grasping instruments used during dissection, suturing and tissue positioning. The characteristic rounded grasping profile provides an alternative to narrow-tip forceps. They support handling of tissue within an operative field, with instrument selection and grip pressure determined by the clinical task.

MedPrax

The listed configuration is a ultrasonic harmonic surgical generator and shears system providing precise simultaneous cutting and coagulation of soft tissue and vessels up to 5mm with minimal thermal spread. It uses ultrasonic energy for surgical tissue cutting and coagulation through a compatible handpiece.

MedPrax

This five-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS with IV Pole. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This six-channel ECG system supports acquisition and presentation of the electrical activity of the heart. The listing identifies synchronous acquisition for collecting signals during a cardiac examination. It forms part of an electrocardiography workflow, with lead acquisition, report format and interpretation functions confirmed for the selected model.

MedPrax

This two-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS Panels. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

Surgical forceps are grasping instruments used to hold tissue or small objects during clinical procedures. The range is available in different sizes and working-end profiles for different handling requirements. They support tissue manipulation, dressing placement and instrument handling as part of a surgical setup.

MedPrax

This ICU ventilator listing is intended for adult and pediatric respiratory-support workflows. A ventilator assists breathing by controlling gas delivery through an appropriate patient circuit. The selected operating modes, patient-size limits and monitoring functions need to match the clinical requirements of the intensive-care service.

MedPrax

A rake retractor is a hand-held surgical instrument used to draw back tissue and expose an operative site. This listing describes a working end with sharp teeth for engaging tissue edges. It supports controlled retraction during open procedures where the clinician needs access to underlying structures.

MedPrax

Neurosurgical drills are used for controlled bone drilling during cranial procedures. The range is available in different sizes to accommodate procedure-specific drilling requirements. Drill selection depends on the required access, compatible cutting attachments and the operating-room setup.

MedPrax

An anesthesia workstation listing with an integrated ventilator and two vaporizers. The exact gas configuration, ventilation modes, monitoring functions, vaporizer compatibility, breathing circuit and included accessories are not specified. Confirm each item against the offered model and manufacturer documentation.

MedPrax

A digital ambulatory Holter ECG recorder supports cardiac rhythm recording outside a short clinical examination. This listing identifies 24/48-hour monitoring and accompanying analysis software; the offered recording duration and channel configuration depend on the selected model. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

A manually operated hospital bed for patient support and positioning. The listing does not specify the number of adjustment functions, dimensions, safe working load, frame material, mattress platform or castor and brake configuration. Request the model-specific datasheet to confirm these details.

MedPrax

A linear cutter is a surgical stapling instrument that divides tissue along a linear path and staples the cut edges. The combined cutting and stapling action supports tissue separation and reconstruction. It is used in procedures involving resection or anastomosis, with cartridge selection matched to the intended tissue.

MedPrax

A surgical clip applicator is used to place clips for vessel or tissue ligation. The range includes applicator formats for open and laparoscopic approaches. The applicator must be selected with a compatible clip type and size for the intended ligation task.

MedPrax

A Frazier suction instrument is used to remove fluid from smaller or deeper operative spaces. The typically angled working profile supports access during ENT and neurosurgical procedures. It forms part of a clinical suction setup where the tip size and access angle are matched to the surgical field.

MedPrax

Straight Metzenbaum scissors are lightweight surgical scissors used for cutting and dissecting delicate soft tissue. The straight working profile supports direct access to the tissue being prepared. They are selected for fine dissection within surgical instrument sets where heavier cutting scissors are less appropriate.

MedPrax

A malleable retractor is a bendable surgical instrument used to hold tissue away from an operative site. The working profile can be shaped to suit the exposure required during a procedure. It is used in abdominal and other open surgical workflows, including tissue separation during closure.

MedPrax

A Richardson retractor is a surgical instrument used to hold back deeper tissue during open procedures. It supports exposure of structures beneath the incision through controlled manual retraction. The blade size and working length are selected to match the tissue depth and operative approach.

MedPrax

A linear stapler places a linear staple line to approximate or secure tissue during surgery. This listing describes a stapling instrument without a cutting function. It supports ligation and anastomosis workflows where stapling is required separately from tissue division.