Medical Equipment in Thimphu

MedPrax

This ICU ventilator listing is intended for adult and pediatric respiratory-support workflows. A ventilator assists breathing by controlling gas delivery through an appropriate patient circuit. The selected operating modes, patient-size limits and monitoring functions need to match the clinical requirements of the intensive-care service.

MedPrax

An Allis clamp is a toothed surgical grasping instrument used to hold and retract tissue. The toothed jaw pattern supports a firm hold on tissue where that grasping action is appropriate. It is used for controlled traction and tissue positioning and should be distinguished from non-toothed clamps for delicate structures.

MedPrax

A linear stapler places a linear staple line to approximate or secure tissue during surgery. This listing describes a stapling instrument without a cutting function. It supports ligation and anastomosis workflows where stapling is required separately from tissue division.

MedPrax

A patient monitor displays physiological measurements for observation of patient status. This listing covers monitoring equipment for intensive care, operating theatres and hospital wards. The available measurements and accessories depend on the selected configuration and the department monitoring requirements.

MedPrax

This two-function manual hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS Panels. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

This five-function electric hospital bed supports patient resting and positioning in a hospital care environment. The listed construction uses Carbon Steel and ABS. The bed configuration is selected according to ward requirements, available space and the patient-positioning tasks.

MedPrax

The listed configuration is a 12-channel electrocardiograph with 10.1-inch color touchscreen, simultaneous 12-lead acquisition, Glasgow interpretation algorithm, and 216mm wide thermal printer. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

A rake retractor is a hand-held surgical instrument used to draw back tissue and expose an operative site. This listing describes a working end with sharp teeth for engaging tissue edges. It supports controlled retraction during open procedures where the clinician needs access to underlying structures.

MedPrax

A defibrillator delivers controlled electrical therapy as part of emergency cardiac care. It is used in resuscitation workflows where the required rhythm assessment and therapy functions must be available. The selected system and accessories are matched to the clinical setting and the intended defibrillation configuration.

MedPrax

The listed configuration is a ultrasonic harmonic surgical generator and shears system providing precise simultaneous cutting and coagulation of soft tissue and vessels up to 5mm with minimal thermal spread. It uses ultrasonic energy for surgical tissue cutting and coagulation through a compatible handpiece.

MedPrax

An insufflator delivers carbon dioxide to establish and maintain a working space during laparoscopic surgery. It supports pneumoperitoneum as part of the minimally invasive operative setup. The system is selected according to the required flow capability, pressure controls and compatibility with the intended tubing and access equipment.

MedPrax

The listed configuration is a all-in-one 3-in-1 wireless pocket handheld ultrasound probe combining Convex, Linear, and Phased Array cardiac scanning heads with wireless Wi-Fi streaming to iOS, Android, and Windows devices. It uses sound-wave imaging to support examination and review of internal anatomy.

MedPrax

An anesthesia workstation supports delivery of anesthetic gases and management of ventilation during surgery. It forms part of the operating-theatre anesthesia setup alongside the required patient monitoring equipment. The selected configuration is matched to the intended breathing circuit, vaporizers and ventilation requirements.

MedPrax

An oxygen concentrator separates oxygen from ambient air to supply concentrated oxygen for prescribed respiratory therapy. It supports oxygen-delivery workflows using an appropriate patient interface. The selected flow rating and oxygen concentration specification need to match the clinical requirement and intended operating environment.

MedPrax

This anti-bedsore alternating pressure air mattress provides an alternating-pressure support surface for patient care. The listed construction uses Medical Grade PVC/TPU. The mattress forms part of a clinical pressure-management plan and is selected for compatibility with the intended bed.

MedPrax

A syringe pump controls medication or fluid delivery by advancing a syringe at a set rate. It supports infusion workflows requiring controlled delivery of smaller volumes. The selected pump must accommodate the intended syringe sizes and the dosing functions required by the clinical service.

MedPrax

An infusion pump controls delivery of fluids, medication or nutrition through an infusion line. It supports prescribed infusion workflows where delivery rate and volume need to be managed. The pump configuration is selected with compatible administration sets and the functions required by the treatment service.

MedPrax

A digital ambulatory Holter ECG recorder supports cardiac rhythm recording outside a short clinical examination. This listing identifies 24/48-hour monitoring and accompanying analysis software; the offered recording duration and channel configuration depend on the selected model. It supports recording and review of cardiac electrical activity within the examination workflow.

MedPrax

A digital audiometer is used to assess hearing thresholds by presenting controlled sound stimuli and recording patient responses. This listing includes software for use with a laptop, supporting the organization and review of audiometry results. It supports hearing-assessment workflows in audiology and ENT services.

MedPrax

A mobile C-arm provides fluoroscopic imaging during surgical and interventional procedures. Its C-shaped imaging arrangement supports positioning around the area being examined. It forms part of an intraoperative imaging workflow, with detector format and system configuration selected for the intended clinical use.

MedPrax

A video rhino laryngoscope provides endoscopic visualization for examination of the nasal passages, pharynx and larynx. It supports ENT assessment and review of upper-airway anatomy through a video image. The instrument is used in clinical examination workflows where direct visualization helps the clinician assess the area of interest.

MedPrax

A multi-position patient bed with manually operated crank mechanisms that adjust the head section, knee section, and overall bed height to facilitate patient positioning, comfort, and clinical access. The bed frame is constructed from tubular steel with a four-section mattress platform, collapsible side rails, and four locking castors for safe mobility. It is the primary inpatient sleeping and treatment surface in hospitals and long-term care facilities.

MedPrax

This portable video bronchoscope provides endoscopic visualization of the trachea and bronchial passages. Video imaging supports airway inspection and documentation during pulmonary examinations. The portable format accommodates clinical workflows where bronchoscopic visualization is required away from a fixed endoscopy installation.

MedPrax

A cartridge-based point-of-care analyzer provides blood-gas and electrolyte measurements from a small blood sample. It supports near-patient analysis of blood-gas and electrolyte measurements for clinical review.

MedPrax

This ABS resuscitation trolley organizes supplies for emergency treatment in intensive care and other clinical areas. The listing specifies swivel castors for movement between care locations and red, blue or grey colour options. It supports a mobile emergency-equipment workflow, with the storage arrangement and equipment holders selected to suit the department setup.